Professional screw profiles

Flooring profiles create smooth thresholds between different flooring surfaces or between rooms and ensure perfect edges. They are attached to the floor invisibly and professionally. The cover section is screwed onto the carrier section using the pre-drilled, sunken holes, and can be removed at any time for cleaning or replacement. Our profiles are designed to fit flooring depths of 7 to 15 mm, sufficient for almost all standard floorings. Aluminium throughout, our profiles are extremely stable. The surface are given a high quality anodized finish. All profiles are supplied with all screws and plugs.

Threshold Profile system 2 part, screw-in:

Threshold profiles ensure harmonious, flexible bridge between floorings of the same height and are a decorative cover for the all-important expansion gaps. Levels height differences of up to 3 mm. Height: from 7 to 15 mm, width: 34 mm

Ramp Profile system 2 part, screw in:

Ramp profiles are used to joint two floorings of different strengths e.g. laminate/paarquet to carpet, tiles, PVC and creates an attractive transition between them. Height: from 7 to 15 mm, width: 44 mm

End Profile system 2 part, screw-in:

End profiles create a tidy edge for thresholds, tiles, stairs and door frames and provide a harmonious finish to the flooring. Height: from 7 to 15 mm, width: 22 mm

Profi-Click-Profilsystem

Our new professional click profiles are secured with invisible screws. Anodized, ribbed or high quality imitation wood film finishes are available. They consist of a plastic main piece, adaptors and aluminium upper piece. These profiles are an innovative flooring solution with fibre-optic strengthened adaptors for flooring heights from 6 to 15 mm. This offers a simple, technically unique method of laying flooring. Supplied in complete packages including adaptors to fit laminate and parquet floorings as well as screws and plugs for the main profile.

Threshold click profile system:

Suitable for joining floorings of the same height, for laminate and parquet. 6 to 15 mm high, 34 mm wide, available with an anodised fiish in 3 modern colours or with a high quality imitation wood coating.

Ramp click profile system:

Suitable for joining floorings of different heights, for laminate and parquet. 6 to 15 mm high, 45 mm wide, available with an anodized finish in 3 modern colours or with a high quality imitation wood coating.

End click profile system:

Suitable for creating tidy edges on walls and other borders, for laminate and parquet. From 6 to 15 mm high, 25 mm wide, available in an anodised finish in 3 modern colours or with a high quality imitation wood coating.

Premium profile system, pivoted

High quality profile system for floorings up to 23 mm high. The pivoted main profile offers optimum levelling. The upper profiles are designed to be particularly flat to minimize the risk of tripping. 2-part aluminium with screw-in profile top.

Treshold profile system, pivoted:

Unter- und Oberteil, schraubbar, Aluminium eloxiert, für Höhe 7 - 17(22)mm, 37mm breit

Anpass-Profilsystem, schwenkbar:

Lower and upper pieces screw-in. Anodized aluminium. Height: from 7 to 17 (22) mm, width: 37 mm

Stair edge profile system, screw-in

These two part stair edge profiles are ideal for renovating stairs. Extra wide main section and screw-in carrier section. Its non-slip surface, which can be removed at any time, creates a safe edging for your stairs. Aluminium upper and lower sections, anodised upper surfaces in modern colours. Quick and convenient to assemble 20 x 26.5 mm, for floorings between 7 and 16 mm high.