PuR 2.0

This professional acoustic mat consists of PuR/mineral compounds. Superb walking noise reduction (18%) and minimal thermal resistance and integrated moisture protection.

Density: 700 kg/m³, thickness: 2,0 mm
Dimensions: 93,5 cm x 8,02 m
Reflected sound reduction: 18%
Load: >10 t/m²

Wood 5.5

This insulation panel is made from wood fibres and is especially suitable for thermal insulation e.g. for rooms below ground level (cellars), but is unsuitable for rooms with underfloor heating. Because of its high wood content, a PE foil must be laid underneath it for moisture protection.

15 panels/packet = 7m²
Reflected sound reduction: 4,7 Sone
Transmitted sound reduction: 19 dB
Very good pressure stability: apprx. 7 to/m²

XPS 4.0 Alu

Our PS parquet underlay is ideal for laying on mineral surfaces. It smoothes uneven patches and offers a high level of thermal insulation. For this reason it is not suitable for laying on floors with underlfoor heating. Aluminium lamination offers protection from residual damp from the floor finish. 15 panels/packet, Dimension: 0.59x0.79 m x 15 = 7m2

Reflected sound reduction: 20 dB
Room weight: 40 kg/m³
Very good pressure stability: apprx. 5 to/m²

XPS 2.0

Insulating underlay made from extruded polystyrene with good walking noise reduction and high pressure stability.

Basic material: XPS
Density: 55 kg/m3, thickness: 2,0 mm
Dimensions: 1,1 m x 15 m
Reflected sound reduction: 12%
Transmitted sound reduction: 20 dB

XPS 3.0

Folded insulating underlay, 3mm thick, from extruded polystyrene. Packed in collapsible boxes, easy to store and transport.

Basic material: XPS
Density: 40 kg/m3, thickness: 3,0 mm
Dimensions: 1,2 m x 8,33 m
Reflected sound reduction: 20 dB
Thermal insulation: 0,108 m2K/W

XPS 5.0

5 mm thick panels from extruded polystyrene. Excellent insulating properties and high impact noise reduction. Levels uneven patches of up to 4 mm. 15 panels/packet.

Basic material: XPS
Density: 36 kg/m³, thickness: 4,0 mm
Dimensions: 0,59 m x 0,79 m
Reflected sound reduction: 22 dB
Thermal insulation: 0,215 m2K/W

PE 2.0 / 4.0

The 2 or 4 mm thick PE foam is the most cost effective option. It has medium impact noise insulation and thermal insulation properties. The disadvantage is its low density and corresponding compression resistance. Because it is so thin, the 2 mm foam underlay is ideal for use in renovation projects. A variety of roll lengths are available.

Transmitted sound reduction: 16 dB
Room weight: 20 kg/m³

EPS 1.6

This product combines impact noise insulation and moisture protection and is supplied in a convenient folding panel format. Material: expanded polystyrene with aluminium - metallised PET coating. Overlapping, self-adhesive coating. Ideal for use with underfloor heating.

Densitiy: 10 kg/m3, thickness: 1,6 mm
Dimensions: 1,2 m x 12,5 m
Transmitted sound reduction: 20 dB
Underfloor heating: 0,050 m2 K/W

EPS 3.0

This product combines impact noise insulation and moisture protection and comes in an ideal folded panel format. Material: expanded polystyrene with aluminium metallised. PET coating. Overlapping, self-adhesive coating.

Density: 10 kg/m3, thickness: 3,0 mm
Dimensions: 1,2 m x 8,33 m
Moisture protection: SD > 100 m
Transmittet sound reduction: 20 dB

PE-Folie

PE sheet must be used as a damp barrier especially when laying flooring on new subsurfaces (residual damp) and where there are large temperature differences with the room below. It prevents rising damp from damaging the laminate flooring. Available in different thicknesses and roll lengths.

Material: Polyethylen